【EPDM】DN100三元乙丙橡胶接头“换热机组”

EPDMCASE SHOW

【EPDM】DN100三元乙丙橡胶接头“换热机组”

服务内容:【EPDM】DN100三元乙丙橡胶接头“换热机组”

简介:【EPDM】DN100三元乙丙橡胶接头“换热机组” DN100 three yuan ethylene propylene rubber joint “heat exchange unit” 上海淞江减震器集团有限公司官方网站为您介绍:【EPDM】DN100三元乙丙橡胶......

【EPDM】DN100三元乙丙橡胶接头“换热机组”
DN100 three yuan ethylene propylene rubber joint “heat exchange unit”

上海淞江减震器集团有限公司官方网站为您介绍:【EPDM】DN100三元乙丙橡胶接头“换热机组”信息,淞江集团为众多客户换热机组厂家提供耐高温橡胶接头,主要采用三井4045三元乙丙橡胶生产,其中含量达到50%左右,我厂有三方含量检测报告,假一赔十。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN100 EPDM Ternary Ethylene-propylene Rubber Joint “Heat Exchanger Unit” information, Songjiang Group provides high temperature resistant rubber joint for many customers heat exchanger manufacturers, mainly using Sanjing 4045 Ternary Ethylene-propylene Rubber production, which content reaches about 50%, our factory has three. Square content test report, false one compensate ten.

一、DN100换热机组三元乙丙橡胶接头实物拍照:

二 、换热机组三元乙丙橡胶接头介绍:
名称:EPDM橡胶接头
型号:KXT-EPDM
口径:DN100
压力:1.6Mpa
长度:150mm
轴向压缩:18mm
轴向拉伸:10mm
横向位移:12mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准)
适用介质:弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用。)
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海淞江减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证、质保书、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN100
Pressure: 1.6Mpa
Length: 150mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、换热机组三元乙丙橡胶接头发货现场:

四、换热机组三元乙丙橡胶接头工厂介绍:

相关案例:供暖耐高温橡胶接头案例

原创文章如转载,请注明本文链接: https://www.songjiangjituan.com/1818.html    浏览:8,461


最新推荐:
  • ·【湖北荣成纸业】316L橡胶接头合同案例
  • ·HTA-10-A酒店风机盘管减震器
  • ·CML大同机械注塑机“卓越在人、共创分享”
  • ·【上海宝山宝龙广场】变压器弹簧减震器合同
  • ·NBR丁腈橡胶缠绕式橡胶膨胀节
  • ·自动成型机陆续进厂“进一步提高橡胶接头质量标准”
  • ·淞江集团热烈庆祝伟大的祖国更加繁荣昌盛
  • ·【青岛国际院士生物药区项目】弹簧减震器
  • ·上海淞江集团南通工厂年产120万件减震器项目进度跟踪
  • ·【深圳新化医院】弹簧减震器合同