【PTFE】DN150内衬四氟橡胶补偿器（304+NR）

【PTFE】DN150内衬四氟橡胶补偿器“搭配不锈钢法兰”
[PTFE] DN150 lined Teflon rubber compensator "with stainless steel flange"

上海淞江减震器集团有限公司官方网站为您介绍：【PTFE】DN150内衬四氟橡胶补偿器“搭配不锈钢法兰”信息，淞江集团为食品管道、制药管道生产一款内衬四氟橡胶补偿器产品，该产品主要采用不锈钢法兰与天然橡胶管体搭配，然后在内径衬一层2mm厚度的聚四氟乙烯材料，起到保护管路的作用，而且也不影响橡胶补偿器原有的减震、降噪、位移等功能。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. introduces to you: [PTFE] DN150 lined Teflon rubber compensator "with stainless steel flange". Songjiang group produces a Teflon rubber lined compensator product for food pipeline and pharmaceutical pipeline. The product mainly uses stainless steel flange with natural rubber pipe body, and then a layer of 2mm thick Teflon material is lined on the inner diameter to protect the pipeline, Moreover, it does not affect the original damping, noise reduction, displacement and other functions of the rubber compensator.

一、DN150内衬四氟橡胶补偿器实物拍：

二、DN150内衬四氟橡胶补偿器发货现场：

三、为什么选择上海淞江集团？

淞江集团生产的所有不锈钢法兰全部采用国标正材原材料生产，出厂前全部经过光谱仪检测，合格后才能出厂，并且我厂所有不锈钢法兰支持客户任意光谱仪检测，假一赔十。
天然橡胶：淞江集团生产的所有普通型橡胶接头，使用介质为普通水、80度以下的产品全部采用天然橡胶生产，其含胶量达到50%左右，支持各种检测，而且，淞江集团采用的天然橡胶品牌为东风1#或云象牌两种，业内人士都知道这2个品牌天然橡胶的价格如何，不要拿统称天然橡胶的其他品牌来对比，更不要拿什么马来西亚进口天然橡胶等来对比，一吨橡胶相差好几千元，没有可比性。

相关链接：【原材料】高品质原材料 100%原橡胶

All stainless steel flanges manufactured by Meijiang Group are made of raw materials of national standard materials. All of them are tested by spectrograph before they leave the factory. All stainless steel flanges in our factory can not leave the factory until they are qualified.

Natural Rubber: All the ordinary rubber joints produced by Meijiang Group are made of natural rubber with the medium of ordinary water and under 80 degrees. The rubber content of the joints is about 50%. It supports all kinds of testing. Moreover, the brand of natural rubber adopted by Meijiang Group is Dongfeng 1# or Yunxiang, which is well known to the industry. These two brands of natural rubber prices, do not take the collective name of natural rubber to compare other brands, let alone what Malaysian imports of natural rubber to compare, a ton of rubber is thousands of dollars, there is no comparability.

四、DN150内衬四氟橡胶补偿器介绍：

1、法兰材质：不锈钢法兰（有304和316可选择）

2、橡胶材质：天然橡胶；另有氟橡胶、丁腈橡胶、三元乙丙橡胶（我们采用日本三井4045三元乙丙橡胶，100%原橡胶，无再生胶，假一赔十；）

3、内衬材质：聚四氟乙烯（采用韩国大金PTFE）

4、货期：没有现货，生产需要7天左右

5、质保：质保1年

6、了解该产品更多型号参数表请点击：【样册P33】KXT型可曲挠橡胶接头

五、DN150内衬四氟橡胶补偿器工厂介绍：
The following is the introduction of Songjiang group.

相关链接：您也可以使用不锈钢金属软管产品来用于酸碱性高的管道上面：JTW-PTFE型四氟金属软管