<br />
<b>Warning</b>:  Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/www.songjiangjituan.com/wp-content/themes/onii/header-pc.php</b> on line <b>27</b><br />

主机CASE SHOW

SHM-6-6000压缩离心式冷水机组弹簧减震器

服务内容:SHM-6-6000压缩离心式冷水机组弹簧减震器

简介:SHM-6-6000压缩离心式冷水机组弹簧减震器 Compression centrifugal chiller spring damper 上海淞江减震器集团有限公司官方网站为您介绍:SHM-6-6000压缩离心式冷水机组弹簧减震器信息,淞江集团为电子工厂......

SHM-6-6000压缩离心式冷水机组弹簧减震器
Compression centrifugal chiller spring damper

上海淞江减震器集团有限公司官方网站为您介绍:SHM-6-6000压缩离心式冷水机组弹簧减震器信息,淞江集团为电子工厂压缩离心式冷水机组推荐阻尼弹簧减震器,该产品具有良好的减震效果和降噪效果,以下是详细介绍。
Shanghai Songjiang absorber group limited official website for you to introduce information: SHM-6-6000 compression spring shock absorber centrifugal chillers, Songjiang Electronics Factory Group for the single-stage compression centrifugal chillers recommended damping spring damper, the product has good damping effect and the effect of noise, the following is a detailed introduction.

SHM-6-6000压缩离心式冷水机组弹簧减震器
SHM-6-6000压缩离心式冷水机组弹簧减震器
SHM-6-6000压缩离心式冷水机组弹簧减震器
SHM-6-6000压缩离心式冷水机组弹簧减震器
SHM-6-6000压缩离心式冷水机组弹簧减震器
压缩离心式冷水机组弹簧减震器简介:
1、弹簧采用低频率值设计,并经喷塑处理,耐候性强,防震效果好。
2、顶部、底部均采用防滑耐磨橡胶以及固定螺栓,安全性能大大提高。
3、安装简单并根据实际需要调整水平及高度。

4、能够有效隔离冷水机组、冷却塔、热泵机组、发电机组、等大型动力设备的振动,并保护及延长其使用寿命。

Product introduction:
1, the spring is designed with low frequency, and the weather resistance is good and the shock resistance is good.
2, the top and bottom are all used for anti-skid and wear-resistant rubber and fixed bolts, and the safety performance is greatly improved.
3. The installation is simple and the level and height are adjusted according to the actual needs.
4, it can effectively isolate the vibration of cold water chiller, cooling tower, heat pump unit, generator set, and other large power equipment, and protect and prolong its.压缩离心式冷水机组弹簧减震器质保说明:
淞江集团所有压缩离心式冷水机组弹簧减震器室内使用最高质保10年,本厂所有弹簧减震器弹簧采用汽车弹簧钢,并非工业弹簧钢可比,我们希望在您更换设备前无需更换或维修弹簧减震器。了解该产品详细参数请查看:【样册P73】SHM型可调式弹簧减振器

Quality assurance:
All the spring shock absorber products of Songjiang group are all guaranteed for 10 years. All spring shock absorber springs of our factory are made of automobile spring steel instead of industrial spring steel. We hope that there will be no need to replace or repair spring shock absorbers before you change the equipment.
SHM-6-6000压缩离心式冷水机组弹簧减震器
SHM-6-6000压缩离心式冷水机组弹簧减震器

相关链接:SHM型可调阻尼弹簧减震器安装说明
SHM type spring shock absorber installation instructions related links

使用案例:咸阳电信数据中心

 

原创文章如转载,请注明本文链接: http://www.songjiangjituan.com/1460.html    浏览:6,890


最新推荐:
  • ·【样册P99】ZB型 非金属织物纤维补偿器
  • ·【广船国际】橡胶接头案例“为船舶领域做贡献”
  • ·上海淞江减震器集团南通有限公司开户许可证
  • ·水泵惯性基座减震器与橡胶接头一起装车
  • ·分享:电厂可曲挠膨胀节补偿器有哪些技术要求?
  • ·【浙江华宇纸业项目】橡胶接头合同
  • ·为什么橡胶接头会出现拉托现象?
  • ·【生产现场】大口径金属软管生产现场
  • ·【宁德核电项目】橡胶接头合同
  • ·【北京燕化14万吨年聚乙烯项目】波纹补偿器合同