上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

镀锌CASE SHOW

上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8级限位装置”

周期:2018.6.20

服务内容:【镀锌】DN300单球镀锌法兰橡胶接头“送8.8级限位装置”

简介:上海淞江减震器集团有限公司官方网站为您介绍:【镀锌】DN300单球镀锌法兰橡胶接头“送8.8级限位装置”信息,淞江集团为众多高端客户提供DN300单球镀锌法兰橡胶接头,而且还免费赠送8.8级限位装置,起到加固和防脱的作用。


上海淞江减震器集团有限公司官方网站为您介绍:【镀锌】DN300单球镀锌法兰橡胶接头“送8.8级限位装置”信息,淞江集团为众多高端客户配套DN300单球镀锌法兰橡胶接头,而且还免费赠送8.8级限位装置,起到加固和防脱的作用。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. is introduced to you: "galvanized DN300" single ball galvanized flange rubber joint "send 8.8 level limit device" information, Songjiang group for many high-end customers to provide DN300 single ball galvanized flange rubber joint, and also free of charge 8.8 level limit device, play the role of reinforcement and prevention. .

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8*限位装置”

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8*限位装置”

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8*限位装置”

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8*限位装置”

【镀锌】DN300单球镀锌法兰橡胶接头“送8.8*限位装置”

镀锌法兰橡胶接头是由锻打法兰进行了冷镀锌处理,然后与橡胶管组合,并且加装了限位装置,起到了防止拉脱的作用,DN300单球镀锌法兰橡胶接头在使用的过程中起到了减震和降噪的作用,从而保护水泵设备的长期使用寿命,是众多泵房的降噪选择。
限位装置说明:淞江集团所生产的限位橡胶接头产品都配有高强度限位装置,所有螺杆采用8.8级高强度,并非4.8级可比的,耳板也是加宽、加大、加厚,没有对比就没有伤害,而且,我们还配有专用的缓冲胶块,起到了缓冲和降噪的作用。
The galvanized flanged rubber joint is cold galvanized by forging flanges, then combined with rubber pipes, and adding a limiting device to prevent the pull off. The DN300 single ball galvanized flange rubber joint plays the role of shock absorption and noise reduction in the process of use, and protects the long of the pump equipment. It is the noise reduction choice of many pump houses.
The limit device shows that the limited rubber joint products produced by Songjiang group are equipped with high strength limit equipment. All the screws are 8.8 stages of high strength, not 4.8 comparable. The ear plate is also widened, enlarged and thickened without contrast. The effect of noise reduction.

淞江集团生产的DN300单球镀锌法兰橡胶接头全部通过上海市质量技术监督局检测合格,并通过国家型式试验中心的各项性能检测和上海橡胶制品研究中心性能检测,淞江集团在2016年顺利通过橡胶接头行业TS压力管道生产许可,了解更多请点击:淞江集团橡胶接头资质证书
The DN300 single ball galvanized flange rubber joint produced by Songjiang group is all qualified through the Shanghai quality and Technical Supervision Bureau, and through the performance testing of the national type test center and the performance testing of the Shanghai rubber product research center, Songjiang group successfully passed the production license of TS pressure pipeline in rubber joint industry in 2016. Please click the link above.

DN300单球镀锌法兰橡胶接头使用案例:佛山联邦创新工业园
Use case


最新推荐:
·【杭州萧山临江污水处理厂扩建】橡胶接头合同 ·全面为您介绍上海橡胶接头主要材料:天然橡胶
·全新铝合金风机弹簧减震器震撼上市“只为更高的品质” ·【广州番禺敏捷希尔顿酒店项目】弹簧减震器合同
·【珠海宝塔石化项目】橡胶接头合同 ·【福州外贸中心酒店项目】弹簧减震器合同
·橡胶接头胶料采用开炼机混炼时加料顺序执行标准 ·又一批大口径橡胶接头配不锈钢法兰要发货了
·橡胶接头胶料混炼过程中如何注意加料顺序? ·【产品标准】HG/T 2289-2001 可曲挠橡胶接头