上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

卡箍CASE SHOW

上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

卡箍式硅橡胶软接头“非标定制”

周期:2018.5.16

服务内容:卡箍式硅橡胶软接头“非标定制”

简介:上海淞江减震器集团有限公司官方网站为您介绍:卡箍式硅橡胶软接头“非标定制”信息,淞江集团为众多客户定制开发卡箍式硅橡胶软接头产品,该产品主要通过抱箍链接的方式进行密封,以下是详细介绍。


卡箍式硅橡胶软接头“非标定制”
Clamp type silicone rubber soft joint "non standard customization"

上海淞江减震器集团有限公司官方网站为您介绍:卡箍式硅橡胶软接头“非标定制”信息,淞江集团为众多客户定制开发卡箍式硅橡胶软接头产品,该产品主要通过抱箍链接的方式进行密封,以下是详细介绍。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. is introduced to you: the "non standard custom" information of the clamps type silicone rubber soft joints, and Songjiang group for many customers to customize the development card hoop type silicon rubber soft joint products. This product is mainly sealed by the way of the hoop link, which is introduced in detail.

以下是淞江集团卡箍式硅橡胶软接头实物拍照,请勿转载,请勿修改,谢谢合作。
The following is a photo of the Songjiang group's silicone rubber soft connector. Please do not reprint it. Please do not modify it. Thank you for your cooperation.

卡箍式硅橡胶软接头“非标定制”

卡箍式硅橡胶软接头“非标定制”

卡箍式硅橡胶软接头“非标定制”

卡箍式硅橡胶软接头“非标定制”

卡箍式硅橡胶软接头“非标定制”

该款卡箍式硅橡胶软接头是采用硅橡胶生产,厚度*薄可以生产3mm,*厚可以生产15mm,,不耐油,不耐酸碱,卡箍式硅橡胶软接头*大缺点就是不耐压力,*大使用压力不超过3kg,不是橡胶管不耐压,而是卡箍的链接方式不耐压力。
This type of clamp type silicone rubber soft joint is made of silicone rubber, which can produce 3mm with the thinnest thickness. The thickest can produce 15mm, the high temperature resistance is less *, oil resistance, acid base, and the biggest disadvantage of the clamp type silicon rubber soft joint is the non pressure resistance, the maximum use pressure not more than 3kg, not the rubber tube pressure, but the clamp. The way of linking is not resistant to pressure.

相关链接:卡箍橡胶接头
Related links



最新推荐:
·【办公区】500平办公区打造高效办公环境 ·【设备】生产车间新增一台三轴加工中心
·湖北黄石大冶怡和园项目不锈钢橡胶接头合同 ·【广西来宾华锡冶炼锌分厂】DN1200四氟膨胀节合同
·【合肥天都路数据中心】冷水空调金属软接头合同 ·【国电常州发电厂项目】双球橡胶接头合同
·上海淞江减震器集团有限公司 企业介绍 ·【广州粤芯半导体项目】JB弹簧减震器合同
·【展厅】带您零距离感受橡胶接头展厅 ·【福州香格里拉大酒店】泵房减震器合同