上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

NBRCASE SHOW

上海橡胶接头|上海金属软管|上海弹簧减震器尽在上海淞江减震器集团有限公司官方网站

【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”

周期:2018.12.5

服务内容:【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”

简介:上海淞江减震器集团有限公司官方网站为您介绍:【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”信息,淞江集团为电液集成系统生产一种耐油橡胶接头,主要采用丁腈橡胶生产,代号为N41,其中含量达到50%左右,有含量检测报告,也支持各种第三方检测。


【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”
"Electro-hydraulic Integrated System" for Oil-Resistant Rubber Joints of Ductile Graphite Flanges

上海淞江减震器集团有限公司官方网站为您介绍:【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”信息,淞江集团为电液集成系统生产一种耐油橡胶接头,主要采用丁腈橡胶生产,代号为N41,其中含量达到50%左右,有含量检测报告,也支持各种第三方检测。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [NBR] information of "electro-hydraulic integrated system" for spheroidal graphite flange oil-resistant rubber joint. Songjiang Group produces an oil-resistant rubber joint for the electro-hydraulic integrated system, mainly using NBR, code N41, which contains about 50% of the total. Quantitative testing reports also support a variety of third-party testing.
 
橡胶接头行业TS压力管道生产许可企业,TS编号:TS2731B90-2020
Rubber joint industry TS pressure pipe production license enterprise, TS number: TS2731B90-2020

【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”









说明:
我公司耐高温橡胶接头阀体上刻有上海松夏字样,松夏是上海淞江减震器集团有限公司旗下高端品牌,我公司所有特殊橡胶接头阀体上都刻有上海松夏字样(25kg、耐油、耐酸碱、耐高温、耐磨、双球、异径),如果产品上没有刻上海松夏字样的产品不是特殊产品,阀体上刻有上海淞江减震器集团有限公司字样的产品都是16kg过水产品,并非特殊产品。相关证明:松夏与淞江集团关系证明
Explain:
Our company's high-temperature rubber joint valve body engraved with Shanghai Songxia, Songxia is a high-end brand of Shanghai Songjiang Shock Absorber Group Co., Ltd. All our company's special rubber joint valve body engraved with Shanghai Songxia (25kg, oil, acid and alkali resistance, high temperature resistance, wear resistance, double ball, different diameter), if the product does not have The products engraved with Shanghai Songxia characters are not special products. The products engraved with Shanghai Songjiang Shock Absorber Group Co., Ltd. on the valve body are all 16KG aquatic products, not special products.

名称:耐油橡胶接头
型号:KXT-NBR-150
口径:DN150
压力:1.6Mpa
长度:180mm
轴向压缩:18mm
轴向拉伸:10mm
横向位移:12mm
偏向角度:15°
橡胶材质:丁腈橡胶N41
法兰材质:球墨QT450
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:液压油、润滑油、乳化液;(注明:航空煤油、柴油、汽油,不能用,要选择四氟橡胶接头才可以使用
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海淞江减震器集团有限公司
资质证书:合格证、质保书、检验报告、橡胶接头行业TS压力管道生产许可证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: oil resistant rubber joint
Model: KXT-NBR-150
Caliber: DN150
Pressure: 1.6Mpa
Length: 180mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: nitrile rubber N41
Flange material: QT450
Flange standard: GB/T 9119-2000
Applicable media: hydraulic oil, lubricating oil, emulsion; (Note: aviation kerosene, diesel, gasoline, can not be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.


以下是淞江集团介绍:
The following is the introduction of Songjiang group











相关链接:橡胶接头资质证书
Related links


最新推荐:
·【型式试验】可曲挠橡胶接头物料性能试验检测报告 ·【荣获优秀供应商证书】感谢中盈绿能的信任
·BYQ型矩阵式弹簧减震器 ·矩阵式弹簧减震器“您还在为变压器的噪音而烦恼吗”
·【培训】开工前三天各部门持续培训 ·淞江集团祝全国人民2021年新年快乐,牛转乾坤,牛气冲
·【年终奖】2020年终获奖人员“榜样” ·【欧文斯科宁中国项目】橡胶接头合同
·进一步提高减震器品质 检测中心又添一台检测设备 ·长春奥迪Q工厂涂装车间废水处理系统橡胶接头